Efficient. Fast. Compact.
Rise Above the Competition
Efficient
- 20-40 FPM mast climbing speed
- Custom PowerMast systems are available for unique applications
- Height adjustable while in use
- 1,500 lb weight capacity
Fast Setup, Fast Access
- Set up in as little as 15 minutes
- Erected from ground up, unlike swing stage
- Powered by 1/2 in. 8 amp electric drill
- Tools-free mast assembly
Easy Transport
- 100 ft twin PowerMast fits in the back of a truck or van
- Stackable aluminum mast sections
- Compact and stable base plate
Rise Above the Competition
Efficient
- 20-40 FPM mast climbing speed
- Custom PowerMast mast climbers are available for tight spaces
- Height adjustable while in use
- 1,500 lb weight capacity
Fast Setup, Fast Access
- 15-minute twin mast setup
- Erected from ground up, unlike swing stage
- Powered by 1/2 in. 8 amp electric drill
- Tools-free mast assembly
Easy Transport
- Fits in back of truck and van
- Aluminum mast sections
- Stackable mast sections
- Compact and stable base plate
Access Equipment | PowerMast | Swing Stage | Boom/Scissor | Mast Climber | Scaffolding |
|---|---|---|---|---|---|
| Setup Time | Best, twin system assembles in 15 min. | Fair | Good | Fair | Poor |
| Portability | Best, fits in back of truck or also van | Good | Fair | Mostly Fair | Fair |
| Accessing Tight Spots | Best, custom baskets also offered as small as 36 in. x 26 in. | Good | Fair | Mostly Fair | Fair |
| Adjustability | Best, easily powered by corded drill to be eye level at all times, in addition | Fair | Mostly Fair | Fair | Poor |
Fast Setup, Fast Access
Tools-Free Mast Connection
This design saves time and allows for height adjustments while in use. In addition, the built-in safety features on each mast’s coupler system mean PowerMast cannot continue traveling until each section is fully secured.
Gearbox
Our gearbox means the only thing you need to run the PowerMast is an electric drill. This makes our system less expensive to purchase and maintain, and ever so simple to use.
Adjustable Tie
Our adjustable ties provide a wide variety of easy attachment options for the PowerMast system, and can be used with many wall types. Note: Extension tubes available.
Wall-Tied Base
Uses the same quick, tools-free connection as the masts, can be anchored to the ground, and provides a bottom stop for the climbing unit.
Climbing Unit
Features a gearbox with overload clutch, overspeed brake, and lock lever for added safety unmatched by other scaffolds and lifts.
Platform and Basket
Easily attach up to a 30 in. modular deck or railed walkboard to carry personnel, materials, supplies, and tools to the ideal work height.
Platform Support
Fastening to the climbing unit with four quick-locking pins, the adjustable platform support accommodates most platforms and rail systems.
Frequently Asked Questions
The PowerMast wall-tied system can reach up to 200 feet (61 m) working height indoors or outdoors. The freestanding tri-mast system can reach up to 52 feet (15.8 m) working height indoors and 33 feet (10.06 m) working height outdoors.
The PowerMast system supports up to 750 pounds (340 kg) for a single mast and 1,500 pounds (680 kg) for a twin mast configuration.
The PowerMast utilizes our exclusive PowerTrak system, which is powered by a gearbox and standard 1/2-inch electric drill. This makes it easy to operate while eliminating the need for expensive controls or sensors. In addition, the gearbox components are easy to service and replace, lowering maintenance requirements and costs in the long run. The PowerMast climbs at speeds between 20–40 feet per minute.
Yes. The system is highly adaptable and can be configured to navigate around bump outs, balconies, ledges, and recessed windows. This makes it ideal for complex facades and historic buildings.
Setup is fast and efficient and can be completed in as little as 15 minutes, depending on the configuration. The PowerMast features tools-free mast assembly and is erected from the ground up, eliminating the need for time-consuming roof access.
Yes. The PowerMast’s modular design and stackable aluminum masts means it can be completely disassembled to move between jobsites with ease. In fact, a 100-foot (30.48 m) twin system collapses small enough to fit in the back of a truck or van.
The PowerMast wall-tied system is ideal for exterior building work like tuckpointing, waterproofing, masonry restoration, and painting—especially on multi-story buildings or tight urban jobsites. The freestanding tri-mast system is an excellent option for jobs where tying into the building or wall is not an option.
Compact Design
Efficient Freestanding System
I like the product so much, I can see us making a much larger investment in more ReechCraft products going forward.
This is the first time since this building was constructed that we’ve been able to access the top of the atrium to change lights and clean the windows. This custom setup offered an economical and logistically-friendly option for reaching the atrium space while addressing concerns and issues presented by alternative access methods.
The Freestanding PowerMast Quad is a perfect fit for this project.
The PowerMast saved Agra Industries’ time and helped the company become more efficient by helping with time constraints and scheduling.